PreTreat & repair & prime steps
Post new topic   Reply to topic
Historic HomeWorks Forum Forum Index -> Paints & Finishes  
View previous topic :: View next topic  
Author Message
Cracked



Joined: 24 Jun 2017
Posts: 1
Location: Tinseltown, Ca

PostPosted: Tue Jul 11, 2017 3:07 am    Post subject: PreTreat & repair & prime steps Reply with quote

First: Hi! This is my first post... Thank you for getting me approved! Thank you for all your wonderful advice in this form... I've learned a lot but... Still a bit Confused...

I'm in SoCal.. Got a 1920's build building with wood Windows. I'm Trying to do right by them

Would you please clarify steps to prepping wood...

I was using this as a guide:

http://www.historichomeworks.com/forum/viewtopic.php?t=2280&sid=d1e134e07bfe6a1d9000584cf4941629

but then saw a post where you said to do Epoxy repairs First.. Thus.. Confusion. Sorry.

The Scene: Windows: peeling, flaking paint from last paint 5 years ago. They supposedly Removed All layers of built up old oil paint (they used remover to do so..). Not that it mattered. . Not sure if they now have oil or latex. It's all coming off.

Areas of massive damage, rotted wood on sills :(

This is what I've gathered but not sure it's correct:

1: scrape off loose paint as best as possible

2: do 2 part Epoxy Repairs (not Bondo but the good stuff Abeltron)
(What's that about using Linseed Glazing instead?!?!)

http://historichomeworks.com/forum/viewtopic.php?t=1596&start=0

<somehow missed this.. And did this step as last step on a few Windows.. Major trouble I guess. Can't be worse than it is now)

3: Wood Hardner
(Wouldn't doing this Before Boracare prevent penetration of the protection stuff? Or does that not matter once using hardener?)

4: Boracare or Glycol to kill bad things in the wood.

5: Penetrol
(Wipe off after 10 mins)
(What do I do if it dried & now shiny? Ugh)

6: prime with an Oil Based primer
(which must be bought from a smuggler here in CA).

6a: what would happen if primed with one of those clear peel stop primers??

7. Topcoat with Rustoleum oil paint which is Only option in CA..
(Smuggler charges a fortune for actual Oil paint in Ca.. So impossible..
Or maybe I'll do a border run...if it's worth it).
Just tell me it's worth it..


*should I be treating with straight BLO somewhere in this scheme?? Or does the Penetrol cover that enough to satisfy my very thirsty wood??

*WRENCH in above workflow: Abeltron claims one can use their Hardner before their epoxy. Is this true?

*** Larger Wrench: .. If wood needs A LOT of epoxy repairs.. That means wood is soft/damaged.. Doing epoxy First leaves the underneath wood Untreated, no??

And do you use epoxy to seal down edges of peeling paint (because paint peels every 3 years.. Can't afford to strip it every time)?... Ugh. More epoxy then? Ugh.

Ball of Confusion... Keeps going...

Thank you for the clarification!!
~Amber

_________________
Dear Abbey.. I mean John.. I'm trying to repair my relationship with my windows... Please help... Thank you! Cracked & Peeling in Tinseltown
Back to top
View user's profile Send private message
Display posts from previous:   
Historic HomeWorks Forum Forum Index -> Paints & Finishes  
Post new topic   Reply to topic All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum